home *** CD-ROM | disk | FTP | other *** search
-
-
-
-
-
-
-
-
-
-
- --
- -------------------------------------------------------------------------------
- Richard J. Larsen
- Duke University
- Box 98602
- Durham, NC 27708-8602
-
- rjl4@acpub.duke.edu
- rlarsen@egr.duke.edu
-
- -------------------------------------------------------------------------------
- From news@bigblue.oit.unc.edu Tue Feb 8 16:03:55 1994
- Received: from bigblue.oit.unc.edu by SunSITE.Unc.EDU (5.65c+IDA/FvK-1.07) with SMTP
- id AA09356; Tue, 8 Feb 1994 11:38:05 -0500
- Received: by bigblue.oit.unc.edu (AIX 3.2/UCB 5.64/4.03)
- id AA20216; Tue, 8 Feb 1994 11:10:42 -0500
- Received: from GATEWAY by bigblue with netnews
- for winsock@sunsite.unc.edu (winsock@sunsite.unc.edu)
- To: winsock@sunsite.unc.edu
- Date: 8 Feb 1994 16:03:55 GMT
- From: gagegreg@cherry.egr.msu.edu (Greg Gage)
- Message-Id: <2j8d5b$g89@msuinfo.cl.msu.edu>
- Organization: College of Engineering, Michigan State University
- Sender: ses
- Subject: How to select TCP RWIN & TCP MSS
-
-
- Greetings. I hate to add yet another question to this newsgroup but I've exhausted
- my resources here at Michigan State:
-
- I found out that our MTU here at MSU is 256. My question is this: How do you select
- TCP RWIN & TCP MSS? I assumed that TCP MSS was 40 less then MTU (216). But what do
- I put for TCP RWIN? Are any of these relative to the speed of my modem?
-
- This is what I have right now:
-
- MTU = 256
- TCP RWIN = 1024
- TCP MSS = 216
-
- and I get this error when I connect to anything:
-
- IP header checksum error
-
- I'm assuming that all my IP address are correct, and the problem is with these settings.
- If anyone out there can help me out as to what to put for these variables I sure
- would appreciate it.
-
- Thanks,
-
- Greg Gage
-
-
- --
-
- Greg Gage email: gagegreg@egr.msu.edu or @cps.msu.edu
- WWW: http://web.cps.msu.edu/~gagegreg/web/index.html
-
-